3
Dear costumer,
Firstly thank you for purchasing our product.
Carefully read all instructions and warnings in this manual. These guides include important
information about your product safe installation, operation, maintenance and have warning
to take advantage of the most useful product.
Keep this guide in safe and easily available place when it becomes necessary.
Cause of Translation of this booklet from the manufacturer or its publication, resulting from
the incorrect use of the device, to people, to environment or other materials can not be held
liable for damages.
This manual also applies to other models. Differences between models are identied in
the manual.
TECHNICAL SPECIFICATIONS
The ovens are designed to operate with a monophase alternating current of 220-240V AC
50Hz. Anyway, before the installation of the appliance, we suggest you to check always the
specications on the rating label applied on the front bottom side of the oven.
External Dimensions (OVEN)
( Height / Width / Depth )
595mm / 595mm / 570 mm
Installation Dimensions (OVEN)
( Height / Width / Depth )
*580 or 590 mm / 560mm / min.550 mm
External Dimensions (HOB)
( Height / Width / Depth )
55mm / 590mm / 520 mm
Installation Dimensions (HOB)
( Width / Depth )
560mm x 490 mm
Power input oven 2072 W
Power input hob 6000 W
Total power input 8072 W
Fuse 3 x 16 A
Input Voltage / Frequency 220-240V AC 50Hz 380-415V AC 50Hz
Current (Amp) min. 16 A
*See Installation.
The values vary by product model below. All parts are available with the product.
Oven upper heating element 900 W
Oven lower heating element 1100 W
Circular Heating Element 2000 W
Grill heating element 1800 W / 2000 W
Turbo fan motor 22-30 W
Spit motor 6 W
Cavity cooling fan 18-22 W
Oven light 25 W
Energy efciency class # A
#Basis: In electrical ovens, the data on energy labels are in conformity with EN 60350-1.
Values were determined under standart load and convection/hot aie (if available).
To Next Page
Loading...