Pyronix Castle EURO 46 Series

EURO 46, 162 & 280 Programming Manual
Page: 40
Engineer Menu’s
Clean Start 2000
(Grade 3)
Clean Start 2002
(Grade 2)
All Areas: Entry Time 1 [030]
All Areas: Entry Time 2 [030]
All Areas: Exit Time [030]
All Areas: Siren Time [15]
Confirm Time [30]
HU Confirm Time [08]
Siren Delay [00]
Strobe Time [00]
Re-Arm No [3]
AC Signal Delay [040]
Speaker [00]
Settle [005]
Double Knock [10]
Pre-Alarm [030]
Line Fault [020]
Set Fail [040]
Guard Code Alarm [03]
Fire Siren Time [99]
Set Fail Warning [00]
Input NAT Days [14]
Input NAT Hours [00]
Wireless Supervision Time [02]
Wireless Jamming Time [100]
Service Time [000]
SET DATE & TIME
Year (00-99) [07]
Month (1-12) [01]
Day (1-31) [01]
Hours (0-23) [02]
Minutes (0-59) [52]
DST Adjust? No [0]
EXIT MODES
A Exit Mode Final Door [1]
All other Exit Modes Timed [0]
CHANGE CODES
5 Digit PINs Yes [1] No [0]
Change Duress Codes All codes empty
Change Master Manager Code
Master Manager Code 2222
User Areas All Areas
User Set Options Unset/Set [0]
Flexi Set Yes [1]
User Name _
Change Engineer Code 1111
VOLUME CONTROL
All Areas: Entry 4
All Areas: Exit 4
Alarm 7
Fire 7
Tamper 6
Day Alarm 6
Chime 3
Intelligent Set 3
Code Stops Sound Yes [1]
E/E Keypads Only No [0]
Alert Kps Only Yes [1]
Silent Tech Alert No [0]
ALARM RESPONSE
Silent 1
st
Alarm Never [0]
Disable Confirm On Entry No [0]
All Areas Starts At Digi [3]
All Areas Stops At Confirm [4]
Fire, Gas, HU Start At Digi [3]
Fire Stops At Digi [3]
HU Stops at Confirm [4]