Pyronix Enforcer User Manual

Page: 10
CHAPTER 6: UNSETTING THE ALARM (CODE/TAG)
 Enter the building
 The Entry time will start
 Enter your user code
Or
 Present a valid tag to the symbol
circled.
 The level set that the code is assigned
to will be Unset.
 Note: If ‘flexi-set’ is disabled (see
page 19) then the system will
automatically Unset that level set once
a valid user code or tag is presented.
UNSETTING USING A WIRELESS KEYFOB
PLEASE NOTE: Unsetting with a keyfob will
only be allowed if your engineer has enabled
this.
 To unset via a keyfob. Press the
key.
 The keyfob LED will start to flash
GREEN indicating that the system has
unset.

Pyronix Enforcer Specifications

General

Battery Backup	Yes
Mobile App	Yes (PyronixCloud)
Two-Way Wireless Technology	Yes
Power Supply	Mains powered with battery backup
Remote Control	Yes (via keyfob)
Event Log	Yes
Compatibility	Works with Pyronix detectors and accessories
Encryption	AES 128-bit encryption