Pyronix Enforcer - Chapter 13: Master Manager Menu (Continued); Allow Engineer Menu; Enter Anti-Code

Page: 24
13.11 Allow Engineer Menu
If this function is enabled, the engineer will require authorisation from you before they can
access the engineering menu.
 Use the
b and A keys to scroll to
‘Allow Engr Menu’. Press the
I key
 Use the b and D keys to select
either ‘yes’ or ‘no’. Press the I key.
13.12 Enter Anti-Code
If an anti-code or engineer code is required to reset the system after an alarm event, it may be
entered here.
 Use the b and A keys to scroll to
‘Enter Anti-Code’. Press the I key
 Enter the anti-code or the engineer
code and Press the
I key. The system
will be reset.