Page: 4
CHAPTER 1: INTRODUCTION
Two Way Wireless Security Protect Your Family and Property Without Compromise.
This wireless alarm system has been designed with your security in mind; with quick and easy
installation and minimal maintenance, this system protects your home with a multitude of
unique features.
Taking full advantage of the innovative two way wireless technology, the wireless devices on this
system are constantly communicating with each other, using High Security Wireless Encryption
Protocol.
Compared to a conventional one way wireless system, where devices can be ‘asleep’ for up to
five minutes at a time, therefore compromising your security, this alarm system ensures your
safety at your home or office at any time.
This alarm system has been engineered to be secure, reliable and easy to use. It includes the
following features:
Battery Monitoring/Saving
This wireless alarm system uses advanced technology to preserve the battery life of each
wireless device. However, the system informs you when a battery needs replacing a month in
advance before the device stops working. This key feature gives you enough time to change the
battery in the specific device. Conventional wireless alarm systems may not give you a low
battery warning signal, meaning that devices could stop working, leaving your environment
unprotected.
Intelligent Arming
This feature enables the control unit to automatically recognise when you’re at home or away.
Using this knowledge this system is able to arm itself in the correct mode without you having to
choose.
User Friendly Keyfobs
The fully two way wireless keyfob allows you to see the status of the control unit via 3 colour
LEDs:
System armed: When the system is armed a RED LED will illuminate
System disarmed: When the system is disarmed a GREEN LED will illuminate
System fault: When the system is in fault condition an AMBER LED will illuminate.
It is possible to allocate different functions to each keyfob such as arming / disarming different
areas, activating outputs, requesting system status, and activating panic alarms. Up to 32
wireless keyfobs can be added to the wireless alarm system. Each wireless keyfob has its own
user ID which can be reported to the ARC and stored into the event log of the control panel
individually. The keyfob also allows you to arm/disarm every area individually, giving you total
control of your system.
User Automation Outputs
This wireless alarm system includes user automation outputs that give you the option to operate
up to 20 devices such as gates, lights, sprinklers, etc. via your keypad or remotely via your
Keyfob, extending the use of your security system
SMS Text Notifications
This wireless alarm system will notify you via SMS text message of any incidents within your
home in real time. This can be programmed to send a notification in different situations: System
is armed or disarmed: Notification that your child has returned home from school safely. Alarm
activation: Notification that the alarm has been triggered, allowing you to monitor your home
from anywhere in the world.
To Next Page
Loading...
