Page: 23
13.9 Test CHC Communications
This function is used in conjunction with SMS texts. It is used to communicate with the SMS Host
computer (the mobile phone server).
Use the b and A keys to scroll to
‘Test CHC Communications’. Press the
I key
If you are using a PABX line (that needs
a ‘9’ to dial out) press the I key or
press the A key if not.
The control panel will then call the
CHC. If ‘Failed CHC test’ is displayed,
please call your engineer.
13.10 Dial Out Menu
The control panel may be dialled into, and programming information kept on a PC using the
InSite UDL software. This function allows the control panel to dial a Pre-programmed PC
telephone number (programmed by your engineer) to directly dial to a PC. This is usually used
when your engineer requests it.
Use the b and A keys to scroll to
‘Dial Out Menu’. Press the I key
Use the b and D keys to scroll
through the different PC numbers,
press the
I to dial that number
Use the b and D keys to select the
operation that needs to be performed.
Press the I key.
The control panel will dial the
programmed PC. If this fails please
contact your engineer.
Press the A key.
To Next Page
Loading...
