Page: 11
CHAPTER 7: UNSETTING AFTER AN ALARM
Enter your user code
Or
Present a valid tag to the symbol
circled.
The alarm symbol will flash indicating
there has been an alarm activation and
the keypad will display which input has
activated.
Press
A the key to reset the system
UNSETTING AFTER AN ALARM USING A WIRELESS KEYFOB
PLEASE NOTE: Unsetting with a keyfob will
only be allowed if your engineer has
enabled this.
To unset via a keyfob. Press the
key
The keyfob LED will start to flash
GREEN indicating that the system has
unset.
Resetting the system after an alarm
can only be done at the keypad.
To Next Page
Loading...
