Page: 14
CHAPTER 10: INTELLIGENT SETTING
If intelligent arm is enabled by your engineer, the system automatically recognises whether to
full arm (Level Set A), or part arm. (Level Set B). ‘Flexi’Arm (Page 19) should be disabled for this
feature to work properly.
Enter your user code
Or
Present a valid tag to the circled area
Or
Press the set button on the keyfob
The system will set in level set B (the user
code/tag/fob must be programmed for
level sets A and B).
If a final exit input is activated during the
setting procedure the system will quick set
area A.
Quick Arming...
To Next Page
Loading...
