Pyronix Enforcer - Page 20

Page: 20
Select the different buttons to program
using the b and D keys. Press the I
key
Select the appropriate action for the
button using the b and D keys. Press
the I key
 Choose the type, either ‘user’ or
‘manager’ using the d key
 Press the I key
(This screen will not be displayed if you have
programmed a wireless keyfob)
 Enter the arm modes/partitions that
the user will be assigned to.
 Press the I key
 Choose the Setting option for the user
code: Unset/Set, Unset, Set, using the
D key. Press the I key.
(This screen will not be displayed if you have
programmed a wireless keyfob)
 Chooses whether Flexi-Set is to be
enabled/disabled using the D key.
 Press the I key
(This screen will not be displayed if you have
programmed a wireless keyfob)
 Enter the user name (for help on
predictive text please see page 8)
 Press the I key.
 To edit the Master Manager Code,
press the I key.
 Enter the new code / present a tag /
press a keyfob button
 Press the
I key
 Repeat the same procedure as above.