Q-See QC-SERIES User Manual

35
PICTURE 3.4-3
PICTURE 3.4-2
TURN OFF STARTUP WIZARD
Once the DVR is connected to the network and the Internet, there is no need to run the Startup Wizard
again. If you did not turn it off at the end of the setup process, you may disable it.
1. Select System at the bottom of the Main
Menu.
2. Make sure that the General submenu is
selected.
2. Deselect Startup Wizard.
4. Click Save.

Q-See QC-SERIES Specifications

General

Brand	Q-See
Model	QC-SERIES
Category	IP Camera
Language	English