Q-See QC-SERIES - Camera Name; Channel Type

40
CAMERA NAME
Naming your cameras to something more descriptive may help you or other users quickly identify the
area in view.
PICTURE 4.1-6
PICTURE 4.1-7
CHANNEL TYPE
The default method for connecting cameras to your DVR is to use coaxial camera cables. Users can also
take advantage of a building’s pre-installed CAT5 network cables to connect to their cameras.
•IfCAT5cablesareused,thenUTP must be selected for that channel.
•Videobalunsmustbeusedonbothendsofthecable.
•Thisisnotthesamethingasusinganetworkcamera.IPcamerascannotbeconnectedtothisDVR
and the line cannot also be in use with a network.
Added Channel Type
Record schedule moved
to new page.