Q-See QSD2308L - Remote Control

QSD2308L/QSD2316L DVR User’s Manual
11
2.4 Remote Control
The remote control uses two AAA batteries, instructions for loading:
STEP1 Open the battery cover of the Remote Control
STEP2 Insert batteries with the poles (+ and -) correctly aligned
STEP3 Replace the battery cover
Note: If remote does not function check the following:
1. Check polarity of batteries
2. Check the remaining charge in the batteries
3. Check to see if remote control sensor is blocked
If it doesn't still work, exchange for a new remote control or contact your dealer.
The interface of the remote control is shown in Fig 2.10
Fig 2.8 Remote Control
Item
Name
Function
1
Power Button
Push button softly to stop firmware running before pushing harder to
power off.
2
INFO Button
Get information about the DVR such as firmware version, HDD
information
3
REC Button
To record manually
4
Number Buttons
Input numbers or choose camera
5
Multi Screen
Button
To choose multiple screen display mode
6
SEARCH Button
To enter search mode
7
MENU Button
To enter menu
8
ENTER Button
To confirm the choice or setup
9
Direction Button
Move cursor in setup or control PTZ camera
10
+/- Button
To increase or decrease the value in setup
11
Playback
Control Button
To control playback. Fast forward/rewind/stop/single frame play
12
AUDIO Button
To enable audio output in live mode
13
Auto Dwell
Button
To enter auto dwell mode
14
BACKUP Button
To enter backup mode
15
PTZ Control
Button
To control PTZ camera. Move camera/ZOOM/FOCUS/IRIS/SPEED
control
Table 2.2 Functions of Remote Control Buttons