Exit Settings
In Exit Settings the Fixed exit is selected by default.1.
2. Optionally tap the [Advanced] button to set the Advanced settings per job.
3. Tap [>].
Continue with Finish the job definition and start the job, or set the counter settings.
Job Settings (per job)
The Job settings part of the "Advanced settings" menu covers settings that improve the
processing of jobs:
• Flap closer offset: to improve the sealing of specific envelopes you can delay or
advance the moment of sealing. You enter the number of pulses. A minus value
means the sealing is advanced, a plus value means the sealing is delayed. You can
enter a number between -20 and 20.
• System output: mode 1 mode 2
32
| Page 32 | Nov-25-2020 04:16 | Working with Jobs
4
English
To Next Page
Loading...