QuadTech Sentry 30 Plus User Manual

Page 32 of 85 Operation
Function keys of the STAND BY Display
The function keys on the right hand side of the display allow the operator to access the numerous
menus imbedded within the Sentry Plus Series instrument software. Familiarize yourself with
these menus prior to programming a test. Figure 2-1 illustrates the STAND BY display and lists
the functions that can be accessed by pressing the [F1] through [F4] keys.
"STAND BY" or "Power-Up" Display
Function of F1 - F4 Keys
To enter programming mode.
PROGRAM
PRESET
MORE..
MENU
RMT ERROFSTLOCKSTAND BY
1.250kV
3.0s
15.00mA
F1
F4
F3
F2
FALL
RAMP
ARC
LOWAC
STEP 1/1
To view/change preset (initial) settings.
To view/change: memory, system, option,
cal., key lock, pw, error & about.
To view the programmed test setups and
access offset function.
PROGRAM MOREMENUPRESET
F3 F4F2F1
MODE: AC/DC/IR/GC/PA
STEP: 1-10
Soft AGC.
WV Auto Range
AC-V Freq. Memory
Calibration
Option
System
Change Password
Key Lock
Error Log
IR Auto Range
About
View Test Steps (Tabular Format)
OffsetStore
Delete
Recall
Buzzer Volume
Contrast
Multi-Link
High Limit
Voltage
EN 50191
DC 50V AGC
Ramp Time
Test Time
Low Limit
Fall Time
ARC Limit
In Rush Current
Manufacturer
Software version
(Need password to enter)
(Need password to enter)
Insert
Delete
NEXT
(Need password to enter)
Instrument
Status
GFI
FAIL Restart
MORE..
: OFF
: OFF
: OFF
: OFF
M1
Dwell Time
(DC)
(DC, IR)
Figure 2-1: STAND BY Function Key Menus

QuadTech Sentry 30 Plus Specifications

General

Brand	QuadTech
Model	Sentry 30 Plus
Category	Test Equipment
Language	English