QuadTech Sentry 30 Plus User Manual

Operation Page 53 of 85
2.13 Connection to Device under Test
Figure 2-5 illustrates the connection of the Sentry Plus Series unit to a single DUT using the S02
1-meter HV cable set that comes standard with the instrument. The custom white banana
plug/red alligator clip is connected between the OUTPUT terminal on the Sentry Plus Series unit
and the high side of the device under test. The black banana plug/alligator clip is connected
between the RTN/LOW terminal on the Sentry Plus Series unit to the low side of the DUT.
DUT
S02
Cable
Set
+-
F1
RTN/LOW
F2
OUTPUT
DANGERPASS FAIL
F1
F2
F3
F4
START
STOP
Sentry 30 Plus AC/DC/IR Hipot Tester
01
Q uadTech
!
CAUTION
F4
F3
Max 5kVAC
6kVDC
CAL UPDATE
1.250kV
STEP 1/5
STAND BY OFST
0.500mA
3.0s
AC
LOW: OFF
ARC: OFF
RAMP: OFF
FALL: OFF
PROGRAM
PRESET
MENU
M1
RMT LOCK ERR
MORE..
Figure 2-5: S02 Cable Connection
Refer to paragraphs 3.2 through 3.7 for the description and illustration of the connection of
several QuadTech accessories to the Sentry Plus Series instrument.

QuadTech Sentry 30 Plus Specifications

General

Brand	QuadTech
Model	Sentry 30 Plus
Category	Test Equipment
Language	English