QuadTech Guardian 2500 Series - User Manual

Guardian 2500 Series
AC/DC/IR Hipot Tester
Instruction Manual
Form 150319/A8
QuadTech, Inc., 1999
Domestic Sales 800-253-1230
For additional contact information please visit our website
www.quadtech.com
The material in this manual is for informational purposes only and is subject to change, without notice.
QuadTech assumes no responsibility for any error or for consequential damages that may result from the
misinterpretation of any procedures in this publication.
WARNING
Potentially dangerous voltages may be present on front and rear panel terminals. Follow all warnings in
this manual when operating or servicing this instrument. Dangerous levels of energy may be stored in
capacitive devices tested by this unit.
Always make sure the high voltage indicator is not on when connecting or disconnecting the device under
test.
Product will be marked with this symbol (ISO#3684) when it is necessary for the user to refer to
the instruction manual in order to prevent injury or equipment damage.
Product marked with this symbol (IEC417) indicates presence of direct current.
Product will be marked with this symbol (ISO#3684) when voltages in excess of 1000V are
present.

QuadTech Guardian 2500 Series Specifications

General

Brand	QuadTech
Model	Guardian 2500 Series
Category	Test Equipment
Language	English

Summary

Warranty Information

Specifications Overview

Guardian Model Specifications

Technical parameters for Guardian 2510, 2520, and 2530 models.

Common Features and Interfaces

General features, limits, interfaces, and connectors for the instrument.

Optional Interfaces

Describes optional connectivity interfaces like IEEE-488 and RS-232.

Mechanical and Environmental Specifications

Physical dimensions, weight, operating, and storage conditions.

Ordering Information

Catalog numbers and descriptions for different Guardian 2500 models.

Accessories Guide

Accessories Included

List of standard accessories that come with the instrument.

Accessories;Options Available

Optional accessories and their part numbers for purchase.

Safety Precautions

General Safety Warnings

Essential safety instructions for operating the Hipot Tester safely.

Condensed Operating Instructions

Installation and Power Up

Steps to unpack, install, and power on the Guardian 2500 unit.

Test Setup and Programming

Procedures for selecting, recalling, modifying, programming test conditions, and measure offset.

Connections and Test Execution

Wiring diagrams for leads/adapters, initiating tests, and interpreting results.

Section 1: Introduction

Unpacking and Product Overview

Initial inspection of the unit and general description of the Guardian 2500 series.

Front Panel Description

Detailed explanation of front panel controls, indicators, and functions.

Rear Panel Description

Identification of rear panel connectors and their functions.

Installation Procedures

Steps for proper instrument installation, positioning, cleaning, power, and safety checks.

Section 3: Interface

Interface Overview

General information on remote control connectors, I/O capabilities, and timing.

RS-232 and Enhanced Remote I;O

Details on serial communication and advanced remote interfaces, including pinouts.

IEEE-488.2 Interface and Commands

Information on GPIB interface, connections, command set, and data formats.

Remote Calibration and Sample Program

Controlling calibration, data formats, and sample code for interface control.

Section 4: Service & Calibration

General Service Information

Warranty, technical assistance, and contact details for product support.

Instrument Return Procedure

Steps for obtaining an RMA and returning the instrument for service or repair.

Calibration Procedures

Recommended calibration frequency and overview of the procedure, including equipment and steps.