QuadTech Guardian 2500 Series User Manual

Operation/Programming Page 53 of 53
8. Use the up/down arrows key to increase or decrease the digits and the right arrow key
to advance right through all six digits. Enter the password previously stored (all six digits)
before exiting the last digit. The display will now indicate that the Keypad Lockout is Off.
9. Press the UTILITY key to exit or move to other Utility functions with the right arrow
key.
2.4.4 Test Locations
The Guardian 2500 allows operator selection to show all programmed test locations, 1 - 25 and
S1 - S9 (including those with no test programmed) or only those that are enabled.
1. Press the UTILITY key and right arrow key to select the Test Locations function.
2. Press up/down arrow keys to select Hide Disabled Tests or Show All Tests.
3. Press the UTILITY key to exit or move to other Utility functions with the right arrow
key
Keypad Lockout Util Keypad Lockout Util
On
Test Locations Util
Show All Tests
Test Locations Util
Hide Disabled Tests
Keypad Lockout Util
Enter Password to Unlock
Keypad Lockout Util
000000

QuadTech Guardian 2500 Series Specifications

General

Brand	QuadTech
Model	Guardian 2500 Series
Category	Test Equipment
Language	English