QuadTech Guardian 2500 Series User Manual

Operation/Programming Page 57 of 57
Press the UTILITY key to exit or move to other Enhanced Features with the right
arrow key.
2. Delay Time
This entry determines the delay time which precedes any programmed ramp time or ground
continuity test (if enabled).
Press the UTILITY key and right arrow key to select Enhanced Features.
If Enhanced Features is set for On, press right arrow key to select Delay Time.
If Enhanced Features is set for Off, press up/down arrow key to select On and press
right arrow key to select Delay Time.
Press up/down arrow keys to select Test Low Limit for Off or from 0.1 to 999.9sec
in 0.1sec steps.
Press the UTILITY key to exit or move to other Enhanced Features with the right
arrow key.
Test Low Limit Util
Continuous
Test Low Limit Util
End of test
Delay Time Util
Off
Delay Time Util
0.2sec

QuadTech Guardian 2500 Series Specifications

General

Brand	QuadTech
Model	Guardian 2500 Series
Category	Test Equipment
Language	English