Page 56 of 85 Operation
2.15 MENU Parameters
With the Sentry Plus Series instrument in STAND BY status, press [F3] = MENU to access
programmable instrument parameters. The MENU display contains the Memory, System,
Option, Calibration, Key Lock, Change Password, Error Log and About functions. Table 2-5
lists these functions with description and default values.
Table 2-5: MENU Parameters
MENU # Parameter Function
1 MEMORY Store, Recall or Delete a test setup from
instrument memory
2 SYSTEM Change display contrast
Change beeper volume
Enable EN 50191 Current limit
Enable DC 50V AGC
3 OPTION Multi-Link function, currently unavailable
4 CALIBRATION Enter instrument calibration routine
Qualified service personnel only.
5 KEY LOCK Lock out front panel program access.
6 CHANGE PASSWORD Change key lock (user) password.
7 ERROR LOG View status of error queue.
8 ABOUT Instrument Information
Manufacturer, software version, etc
Figure 2-6: Menu Display
PROGRAM
PRESET
MORE..
MENU
RMT ERROFSTLOCKSTAND BY
0.1A
0.5s
1.2
Ω
F1
F4
F3
F2
LOWGCSTEP 1/5M01 OFF:
STAND BY
EXIT
RMT ERROFSTLOCKSTAND BY
F1
F4
F3
F2
MENU
SELECT
1
4
3
2
5
MEMORY
SYSTEM
OPTION
CALIBRATION
KEY LOCK
LAST
DOWN
EXIT
RMT ERROFSTLOCKSTAND BY
F1
F4
F3
F2
MENU
SELECT
6
1
8
7
2
CHANGE PASSWORD
ERROR LOG
ABOUT
MEMORY
SYSTEM
LAST
DOWN
Press F2 = "DOWN" 5 times to
view complete menu choices
Press F3 = "MENU"
To set/change preset parameters
To Next Page
Loading...
Need help?
General
