QuadTech Sentry 30 Plus User Manual

Operation Page 63 of 85
2.15.6 CHANGE PASSWORD
The Sentry Plus Series instruments have a password function for locking out the front panel so
that the instrument PRESET settings and PROGRAM function are disabled. The CHANGE
PASSWORD function applies to the initial instrument password. The password is comprised of
“A” or “B” characters and can be 1-10 characters in length. To activate the CHANGE
PASSWORD function with the instrument in STAND BY status:
• Press [F3] = MENU
• Press [F2] = DOWN until CHANGE PASSWORD is backlit.
• Press [F3] = SELECT
• Display prompts ‘ USER PASSWORD’
• Press [A] [A] [A] [A] [ENTER]
RETURN
RMT ERROFSTLOCK1 - 10 CHAR.
F1
F4
F3
F2
PASSWORD
ENTER
CHANGE PASSWORD
USER PASSWORD
A
B:
xxxx
Press F1 = "A" to input password
character
Press F2 = "B" to input password
character
Press F3 = "ENTER" to enter
whole password
Press F4 = "RETURN" to go back
to MENU display
PROGRAM
PRESET
MORE..
MENU
RMT ERROFSTLOCKSTAND BY
0.1A
0.5s
1.2 Ω
F1
F4
F3
F2
LOWGCSTEP 1/5M01 0.3 Ω :
STAND BY
Press F3 = "MENU"
To change instrument parameters
EXIT
RMT ERROFSTLOCKSELECT FUNC.
F1
F4
F3
F2
MENU
SELECT
6
1
8
7
2
PASSWORD
ERROR LOG
ABOUT
MEMORY
SYSTEM
UP
DOWN
Press F3 = "SELECT" to enter
PASSWORD function
EXIT
RMT ERROFSTLOCKSELECT FUNC.
F1
F4
F3
F2
MENU
SELECT
1
4
3
2
5
MEMORY
SYSTEM
OPTION
CALIBRATION
KEYLOCK
UP
DOWN
Press F2 = "DOWN" to move
highlighted box to PASSWORD

QuadTech Sentry 30 Plus Specifications

General

Brand	QuadTech
Model	Sentry 30 Plus
Category	Test Equipment
Language	English