Page 44 of 85 Operation
Programming a PAUSE in test sequence (continued):
Set
Test Signal
To set test signal:
OFF or ON
To move highlighted box to STEP.
INC.
DEC.
EXIT
NEXT
RMT ERROFSTLOCKOFF / ON
F1
F4
F3
F2
PASTEP 5/5
PAUSE
UNDER TEST SIGNAL
INC.
DEC.
EXIT
NEXT
RMT ERROFSTLOCK1 - 10
F1
F4
F3
F2
PASTEP
PAUSE
UNDER TEST SIGNAL
To set next test step
Exit
Program
Mode
:
: CHANGE-DUT
OFF
:
:
OFF
CHANGE-DUT
5/5
To
exit
programming mode and return
to STAND BY status.
END PA Mode Programming. For the sake of this 5-step example, after selecting the UNDER
TEST SIGNAL ON or OFF, press [F4] = EXIT to exit programming function and return to
STAND BY status.
To Next Page
Loading...
Need help?
General
