BMC CONFIGURATION GROUP
3-67
Procedure:
1. Select the number of Floppy devices, CD/DVD devices and Hard disk devices from
the dropdown list.
2. Enable the Local Media Support if needed.
3. Click Save to save the changes made else click Reset to reset the previously saved
values.
Services
This page used for port setting and displays the basic information about services running
in the BMC. Only Administrator can modify the service.
To open Services page, click Configuration > Services from the menu bar. A sample
screenshot of Services Page is shown below.
Figure 3-43. Services page
The fields of Services Page are explained below.
Maximum of two devices can be added in Floppy, CD/DVD and Hard disk drives.
If there are two device panels for each device, and when you click the Connect button, then
the redirected device panel will be disabled.
Table 29: Services
ITEM DESCRIPTION
Service Name Displays service name of the selected slot (read-only).
Current State Displays the current status of the service, either active or inactive state.
To Next Page
Loading...
Need help?
General
