BMC REMOTE CONTROL
3-83
Procedure:
Select an action and click Perform Action to proceed with the selected action.
Java SOL
This page allows you to launch the Java SOL. The Java SOL is used to view the host screen
using the SOL Redirection.
To open Java SOL page, click Remote Control > Java SOL from the menu bar. A sample
screenshot of Java SOL page is shown below.
Figure 3-50. Java SOL Page
The various options of Power Control are given below.
Table 37: Server Power Control
ITEM DESCRIPTION
Reset Server This option will reboot the system without powering off (warm boot).
Power off Server – Immediate This option will immediately power off the server.
Power off Server – Orderly Shut-
down
This option will initiate operating system shutdown prior to the shut-
down.
Power On Server This option will power on the server.
Power Cycle Server This option will first power off, and then reboot the system (cold boot).
Perform Action Click this option to perform the selected operation.
You will be asked to confirm your choice. Upon confirmation, the command will be executed
and you will be informed of the status.
Table 38: Server Power Control
ITEM DESCRIPTION
Reset Server This option will reboot the system without powering off (warm boot).
Power off Server – Immediate This option will immediately power off the server.
To Next Page
Loading...
Need help?
General
