EasyManua.ls Logo

QUANTA QuantaGrid S31A-1U - BIOS Setting Utility; BIOS Revision

QUANTA QuantaGrid S31A-1U
159 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
BIOS BIOS UPDATE UTILITY
2-16
Microcode updates.
ME Firmware.
BIOS Setting Utility
Use AMISCE to import/export BIOS setting in Linux:
1. Export BIOS setting and generate script file:
/o /s NVRAM.txt
2. Import BIOS setting with script file:
/i /s NVRAM.txt
BIOS Revision
The BIOS revision is used to identify the BIOS image and BIOS phase.
Table 10: Terminology
Term Description
ACPI
Advanced Configuration and Power Interface. ACPI is an open industry specification pro-
posed by Intel, Microsoft and Toshiba. ACPI enables and supports reliable power man-
agement through improved hardware and OS coordination.
AHCI Advanced Host Controller Interface, a SATA controller standard.
ANSI American National Standards Institute.
API
Application Programming Interface. A software abstraction provided by the BIOS to
applications and/or the OS.
ASCII
American Standard Code for Information Interchange. An 8-level code (7 bits plus parity
check) widely used in data processing and data communications systems.
ATA Advanced Technology Attachment, a disk interface standard.
BAR
Base Address Register. Device configuration registers that define the start address, length
and type of memory space required by a device.
BIOS Basic Input/Output System – Firmware interface to the system hardware.
BIST Built-in Self Test.
BMC Baseboard Management Controller.
BSP
Boot strap processor. The processor selected at boot time to be the primary processor in
a multi-processor system.
CATERR Catastrophic Error Signal.
CE Correctable Error (memory ECC error).
CMOS Complementary Metal-oxide-semiconductor.
COM1 Communication Port 1, serial port 1.
DCA Direct Cache Access.
DDR4 Double Data Rate 4 is a high bandwidth memory technology.
DIMM
Dual In-line Memory Module, a plug-in memory module with signal and power pins on
both sides of the internal printed circuit board (front and back).

Table of Contents

Related product manuals