BIOS BOOT OPTIONS SCREEN
2-10
If no boot devices are available – for example, both onboard LAN are disabled and no
bootable device connected when Boot Mode is set to Legacy – the system will auto boot
into BIOS setup menu.
To access this screen from the Main screen, select Boot Options.
Figure 2-5. Boot Options Screen
Table 7: Boot Options Screen Description
SETUP ITEM OPTIONS HELP TEXT COMMENTS
Setup Prompt
Timeout
[<number>}
Number of seconds to wait for
setup activation key.
Default is 5 seconds, max is 10
and min is 1.
Bootup Num-
Lock State
[On]
[Off ]
Select the keyboard NumLock
state
POST Error
Pause
[Disabled]
[Enabled]
Enables or disables POST
Error Pause
Quiet Boot
[Disabled]
[Enabled]
Enables or disables Quiet
Boot option
Boot mode
select
[LEGACY]
[UEFI]
Select boot mode LEGACY/
UEFI
This item decides what devices
(Legacy or UEFI) BIOS should try
to boot when let the system auto
boot up without manually select
boot device.
To Next Page
Loading...
Need help?
General
