Provided with a properly grounded wall outlet.•
Providedwithsufcientspacetoaccessthepowersupplycord(s),becausetheyserveasthe•
product’s main power disconnect.
Provided with either two independent AC power sources or two independent phases from a •
single source.
Equipment Handling Practices1.4.4
Reducetheriskofpersonalinjuryorequipmentdamage:
Conform to local occupational health and safety requirements when moving and lifting •
equipment.
Use mechanical assistance or other suitable assistance when moving and lifting the •
equipment.
To reduce the weight for easier handling, remove any easily detachable components.•
Power and Electrical Warnings1.4.5
CAUTION:
The power is active whenever the system is plugged in. To remove
power from the system, you must unplug the AC power cord from the
wall outlet. Your system may use more than one AC power cord. Make
sure all AC power cords are unplugged. Make sure the AC power
cord(s) is/are unplugged before you open the chassis, or add or remove
any non hot-plug components.
CAUTION:
Do not attempt to modify or use an AC power cord if it is not the exact
type required. A separate AC cord is required for each system power
supply.
CAUTION:
The power supply in this product contains no user-serviceable parts.
Do not open the power supply. Hazardous voltage, current and energy
levels are present inside the power supply. Return to manufacturer for
servicing.
CAUTION:
When replacing a hot-plug power supply, unplug the power cord to the
power supply being replaced before removing it from the switch.
To Next Page
Loading...
Need help?
General
