Quantech QTC4 STYLE A Series User Manual

SECTION 8 - MICROPANEL
QUANTECH
131
FORM QTC4-NM1
ISSUE DATE: 4/2/2018
8
Unit ID Number
PROGRAM
REMOTE UNIT ID NUMBER = X
This indicates the unit ID # programmed at the time of
the fault.
Sound Limit Setpoint
PROGRAM
SOUND LIMIT SETPOINT = XXX %
This indicates the sound limit setpoint programmed at
the time of the fault, if the sound limit option is activat-
ed at the factory. If the option is not factory activated,
the display will not appear.
Eductor Differential Temperature
PROGRAM ◄DEF XXXXX LO XXXXX HI XXXXX
EDUCTOR DIFFERENTIAL = XXX °F
This message indicates the programmed eductor dif-
ferential temperature at the time of the fault.
Eductor Safety Time
PROGRAM ◄DEF XXXXX LO XXXXX HI XXXXX
EDUCTOR SAFETY TIME = XXX MIN
This message indicates the eductor safety time pro-
grammed at the time of the fault.
Motor Temperature Unload
PROGRAM ◄DEF XXXXX LO XXXXX HI XXXXX
MOTOR TEMPERATURE UNLOAD = XXX °F
This message indicates the motor temperature pro-
grammed at the time of the fault.

Quantech QTC4 STYLE A Series Specifications

General

Brand	Quantech
Model	QTC4 STYLE A Series
Category	Chiller
Language	English