Quantronix CUBISCAN 25 User Manual

Communication Protocol CubiScan 25 Command Set
CubiScan 25 Service Manual 60
Factor Toggle
This command is used to set the dimensional factor to either domestic or international.
Flash Firmware
This command causes the CubiScan 25 to flash file cs125.bin stored on the SD card.
41End of Text Control(ETX) 03h
5 1 Carriage Return Control (CR) 0Dh
61Line Feed Control(LF) 0Ah
Pos Len Description Type Range ASCII
Command Format
1 1 Start of Text Control (STX) 02h
2 1 Fact. Toggle Command Alpha (F) 46h
3 1 Dom./Int'l Alpha (D/I) 44h or 49h
41End of Text Control(ETX) 03h
5 1 Carriage Return Control (CR) 0Dh
61Line Feed Control(LF) 0Ah
Acknowledge Format
1 1 Start of Text Control (STX) 02h
2 1 Fact. Toggle Command Alpha (F) 46h
3 1 Acknowledge Alpha (A) 41h
41End of Text Control(ETX) 03h
5 1 Carriage Return Control (CR) 0Dh
61Line Feed Control(LF) 0Ah
Negative Acknowledge Format
1 1 Start of Text Control (STX) 02h
2 1 Fact. Toggle Command Alpha (F) 46h
31Neg. Acknowledge Alpha (N) 4Eh
41End of Text Control(ETX) 03h
5 1 Carriage Return Control (CR) 0Dh
61Line Feed Control(LF) 0Ah
Pos Len Description Type Range ASCII
Command Format
1 1 Start of Text Control (STX) 02h
Pos Len Description Type Range ASCII

Quantronix CUBISCAN 25 Specifications

General

Brand	Quantronix
Model	CUBISCAN 25
Category	Accessories
Language	English