Need help?Do you have a question about the Quantronix CUBISCAN 325 and is the answer not in the manual?
General| Brand | Quantronix |
|---|---|
| Model | CUBISCAN 325 |
| Category | Accessories |
| Language | English |
Describes various booting process errors and troubleshooting steps.
Details measurement errors, including inconsistent readings and boundary issues.
Covers problems with gate cursor, speed, and irregular movement.
Addresses system freezes, unresponsive touchscreens, and indicator issues.
Explains dash indicators, load cell discrepancies, and zero indicator faults.
Provides step-by-step instructions for calibrating the Cubiscan 325 scale.
Instructions for cleaning the gate filters using a damp microfiber cloth.
Procedure for cleaning the glass platform, including precautions.
Method for cleaning the touchscreen display screen gently.
Steps to update the Cubiscan 325 firmware using an SD card.
Procedure for updating firmware using a serial port.
Guide on how to check the currently installed firmware version.
Detailed procedure for balancing the load cells for accurate weight readings.
Instructions for safely replacing a blown fuse in the Cubiscan 325.
Procedure to replace the height receiver board located on the front gate.
Guide to replace the height transmitter board on the back gate.
Steps to replace the width transmitter board at the bottom of the gate.
Procedure to replace the width receiver board located on top of the gate.
Instructions for replacing the encoder and its attached cable.
Guide to replacing the encoder magnet strip on the back linear guide.
Steps for replacing the proximity sensor unit.
Procedure to replace the main controller box assembly.
Instructions for replacing the motherboard inside the controller box.
Guide to replacing the power supply unit located in the controller box.
Steps for replacing the scale card located in the load cell summing box.
Procedure to replace the load cell summing board.
Instructions for replacing one of the four load cells.
How to replace or adjust carriage assemblies for linear gate movement.
Pinout details for RS-232 serial connections and asynchronous parameters.
Pinout details for Ethernet RJ-45 connectors and default settings.
Pinout details for USB 2.0 Type B connector and configuration.
Overview of commands for device control, setup, and data retrieval.
To Next Page
