Quantronix CUBISCAN 325 - Figure 8 Calibration Weights on Scale; Figure 9 Scale Calibration Complete

SCALE CALIBRATION Scale calibration
Cubiscan 325 Service Manual 17
4. Place the calibration weight(s) on the Cubiscan 325 platform (roughly in the center). An
example is shown below.
5. Tap Next to continue.
6. You have finished calibrating the scale. Tap HOME to return to the home screen or if you
would like to try calibrating the scale again, tap Next.
Figure 8
Calibration weights on scale
Figure 9
Scale calibration complete