Quantum Data 980 - Page 41

980 User Guide Rev. B29
Page 41 August 5, 2011
Navigator Panel - Item
Function
 [Instrument] Information - Provides information about the
980 that the 980 Manager is currently connected to. This
information includes:
o 980 Name
o IP address of the 980
o Netmask
o Gateway IP address
o Hardware revisions of the 980 circuit boards
o Firmware/Gateware version of the release applied to the
980
o Serial number of the 980
o OS version
o Licensed options applied to the 980
 Edit Instrument Entry - Enables you to edit certain
information about the 980 that you have selected.
 [Instrument Network] Configure - Allows you to view and
set the network information such as the 980 IP address, subnet
mask and gateway IP address.
 Upgrade GUI Application - Upgrade GUI Application -
Enables you to apply an upgrade of the 980 built-in GUI. You
can download new GUI release from the Quantum Data
website.
 Upgrade Firmware/Gateware - Enables you to apply and
upgrade to the 980. You can download new releases from the
Quantum Data website.
 Upgrade HDMI CT Scripts - Enables you to apply and
upgrade to the optional HDMI Compliance Test application.
You can download new releases from the Quantum Data
website.
 Upgrade System Components - Enables you to apply an
upgrade to the 980 HDMI Source Compliance Test application
or any other optional application. You can download new
releases from the Quantum Data website.
 Set License Key - This enables you to activate a license for an