Operation
Intelligent Electric Vehicle Chargepoints QUBEVSM-V01-R0 Installation and Operation Manual
Page 39 of 42 February 2023
Other Application Features
Edit Charger Details
1. Tap the pencil icon on the Home screen to edit…
x Device Name – Tap the pencil icon shown next to the current charger name. The
name can now be changed. (If more than 18 characters, the name will not fit on the
screen).
x Offline Notifications – When the device is powered off, it will prompt the device to
be offline on the home interface.
x Share Device – The charge point can be shared for use by other EV drivers
according to the software, email, and account linked to the application.
NOTE: When using the QUBEV Smart account to share, the shared account can
be added to the device with the ability to charge but without the ability to change
its operation.
x Device Update – When software updates are available for the charge point, the
application will display this and will prompt you to install the update. The update
can be installed or can be ignored. If ignored, available updates can be installed at a
later date from this location.
x Remove Device – There are options to…
x disconnect the device.
x disconnect and wipe data – which disconnects the device and removes the
Charging record and the Error Log data.
Record Screen
The Charging record and the Error Log can be seen from the Record screen.
To Next Page
Loading...