CV200 Dash Camera User Manual
32
external TF card. The product only identifies the FAT32 file system, please confirm and
format the card at firstly.
6.2.1. Preparation before operations
1) TF Card, SDHC or SDXC, FAT32, w/ card reader
2) MCU Application “CV200_MCU_RxxAxxVxx.enc”
3) Firmware Application “CV200_ RxxAxxVxx.apk”
6.2.2. MCU updating
1) Confirm the current firmware version by Manage tool if needed.
2) Copy the CV200_MCU_RxxAxxVxx.enc file into card path “queclink/bin”.
3) Plug the card into product, confirm the power indicator status while updating. (The indicator is
starting fast blinking)
4) The product will auto reboot and load the new firmware after updating finished.
5) Run Manage tool to login the product and check the version information from the bottom of
software.
6.2.3. Firmware updating
1) Confirm the current application version by mobile app.
2) Copy the CV200_RxxAxxVxx.apk file into card path “queclink/bin”.
3) Plug the card into product, confirm the power indicator status while updating. (The indicator is
starting fast blinking)
4) The product will auto reboot and load the new application after updating finished.
5) Run Manage tool to login the product and check the version information from the bottom of
software.
6.2.4. Platform updating
Platform isn’t updated frequently generally. Before updating, you must assure the present
version and target version.
1) Take the patch file from technical team, and rename it according to the current platform
version and target platform version.
2) Copy the patch file into the folder path “\queclink\bin\” of memory card.
G:\queclink\bin\CV200_package_V2.11_to_V2.13.zip
Platform patch rename
3) Plug the card into product, confirm the PWR indicator status while updating. (The
For example, the platform would be updated from V2.11 (present version) to V2.13 (target
version), the updating file must be named “CV200_package_V2.11_to_V2.13.zip”.
*Don’t remove the power supply while updating, it probably causes a long time to update
the platform application.
*The default updating path is “queclink/bin”, the path folder will auto be generated by the
product if the card has been used to record. Please create the folder path if the card is brand-
new.
To Next Page
Loading...