CV200 Dash Camera User Manual
35
7. Maintenance
7.1. Reboot the product
7.1.1. Reboot button
Follow the steps to reboot the product by hardware button.
1) Ensure that the product is turned on.
2) Short-click the reboot button by ejection pin until all LED indicator turns off and on.
3) You hear the beep sound after the rebooting is completed, all LED indicators light on generally.
7.1.2. Reboot command
The product provides the remote operation command line to reboot it by serial
communication or network transmission.
Query the Queclink CV200 @Track Protocol for more information about “RTO sub command:
3”.
7.2. Retrieve the logs
The log is used for monitoring the running status and analyzing the issues effectively. The
printed log can be sent back to manufacturer to speed up the improvement and
optimization of product.
We can request the logs from device by network:
1) Assure the device is configured to a file storage server (e.g., FTP server).
2) Send the command “RTO-PSL” to device.
3) The device will pack and transfer the log files to the file storage server.
*Please inquiry the detailed information of logs filter with your supplier.
*Response to the rebooting request may be delayed due to the device needs to finish
processing unfinished tasks first.
To Next Page
Loading...