Queclink GL300 - Fixed Report Information (AT+GTFRI)

GL300 @Tracker Air Interface Protocol
Protocol version 6 XX0000 – XXFFFF,
X∈{'A'-'Z','0'-'9'}
Unique ID 15 IMEI
Device name 20
Serial number 4 0000 – FFFF
Send time 14 YYYYMMDDHHMMSS
Count number 4 0000 – FFFF
Tail character 1 $ $
3.2.7. Fixed Report Information
The command AT+GTFRI is used to configure the parameters of scheduled report.
 AT+GTFRI=
Example:
AT+GTFRI=gl300,0,,,,,,,,,,,,,,,,,,,0007$
AT+GTFRI=gl300,1,1,,,0000,2359,60,60,,,1F,,,,,,,,,0007$
Parameter Length
(byte)
Range/Format Default
Password 4 – 6 ‘0’ – ‘9’, ‘a’ – ‘z’, ‘A’ – ‘Z’ gl300
Mode 1 0|1|2|3|4|5|6 0
Discard no fix 1 0|1 1
Reserved 0
Reserved 0
Begin time 4 HHMM 0000
End time 4 HHMM 0000
Check interval <=5 5 – 86400sec 180
Send interval <=5 5 – 86400sec 180
Ignition check interval <=5 5 – 86400sec 180
Ignition send interval <=5 5 – 86400sec 180
Report mask <=4 0000 – 007F 001F
Distance <=5 50 – 65535m 1000
Mileage <=5 50 – 65535m 1000
movement detect mode 1 0|1 0
movement speed <=3 1-999(km/h) 5
movement distance <=4 1-9999(m) 50
Movement send number 1 1-5 5
corner 3 0 - 180 0
Reserved 0
Serial number 4 0000 – FFFF
Tail character 1 $ $
TRACGL300AN001 - 24 -
Queclink
Confidential