Queclink GL300 - Store Command String (AT+GTCMD)

GL300 @Tracker Air Interface Protocol
Serial Number 4 0000 – FFFF
Send Time 14 YYYYMMDDHHMMSS
Count Number 4 0000 – FFFF
Tail Character 1 $ $
3.2.21. Store Command String
The AT+GTCMD command is used to store the commands which will be used by the command
AT+GTUDF.
 AT+GTCMD=
Example:
AT+GTCMD=gl300,1,1,AT+GTRTO=gl300,0,,,,,,000B$,,,,,0005$
Parameter Length (byte) Range/Format Default
Password 4 – 6 ‘0’ – ‘9’, ‘a’ – ‘z’, ‘A’ – ‘Z’ gl300
mode 1 0-1 0
Store cmd id 3 0 – 31
Command string 200 AT command
Reserved 0
Reserved 0
Reserved 0
Reserved 0
Serial number 4 0000 – FFFF
Tail character 1 $ $
 <Mode>:The working mode of the store command string.
 0: Delete the stored command.
 1: Add the stored command.
 <Store cmd id>: A numeric to identify the stored command.
 <Command string>: the whole content of the stored command.
The acknowledgement message of AT+GTCMD command:
 +ACK:GTCMD
Example:
+ACK:GTCMD,1A0102,135790246811220,,0005,20100310172830,11F0$
Parameter Length (byte) Range/Format Default
Protocol version 6 XX0000 – XXFFFF,
X∈{'A'-'Z','0'-'9'}
Unique ID 15 IMEI
Device name 20
Serial number 4 0000 – FFFF
Send time 14 YYYYMMDDHHMMSS
Count number 4 0000 – FFFF
Tail character 1 $ $
TRACGL300AN001 - 45 -
Queclink
Confidential