Queclink GL300 - Real Time Operation

GL300 @Tracker Air Interface Protocol
 1: Drive the motor vibration when the power key is long pressed to power off
 <Function key ind>: A numeric to indicate the working mode of the motor for function key.
 0: Disable drive the motor when the function key is long pressed
 1: Drive the motor vibration when the function key is long pressed
The acknowledgement message of AT+GTFKS command:
 +ACK:GTFKS,
Example:
+ACK:GTFKS,1A0102,135790246811220,,000A,20100310172830,11F0$
Parameter Length (byte) Range/Format Default
Protocol version 6 XX0000 – XXFFFF,
X∈{'A'-'Z','0'-'9'}
Unique ID 15 IMEI
Device name 20
Serial number 4 0000 – FFFF
Send time 14 YYYYMMDDHHMMSS
Count number 4 0000 – FFFF
Tail character 1 $ $
3.2.11. Real Time Operation
The AT+GTRTO command is used to retrieve information from the terminal or control the
terminal.
 AT+GTRTO=
Example:
AT+GTRTO=gl300,0,,,,,,000B$
Parameter Length (byte) Range/Format Default
Password 4 – 6 ‘0’ – ‘9’, ‘a’ – ‘z’, ‘A’ – ‘Z’ gl300
Sub command 1 0 – F
Single Configuration
Command
3
Reserved 0
Reserved 0
Reserved 0
Reserved 0
Serial number 4 0000 – FFFF
Tail character 1 $ $
 <Sub command>: A numeric to indicate the sub command to execute.
0: (GPS): Request GPS related information, including setting of <GPS on need>,
<Report items mask>, <Report mask> of fixed report, GPS antenna type, GPS
antenna status and the last known time of successful GPS fixing.
TRACGL300AN001 - 32 -
Queclink
Confidential