EasyManua.ls Logo

Queclink GL300 - Device Information Report

Queclink GL300
90 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GL300 @Tracker Air Interface Protocol
,20100214013254,,,,+0800,0,20100214093254,11F0$
Parameter Length (byte) Range/Format Default
Protocol version 6 XX0000 – XXFFFF,
X{'A'-'Z','0'-'9'}
Unique ID 15 IMEI
Device name 20
State 2 21|22|41|42
ICCID 20
CSQ RSSI <=2 0 – 31|99
CSQ BER <=2 0 – 7|99
External power supply 1 0|1
Mileage <=9 0.0 4294967.0Km
Reserved 0
Battery voltage <=4 0.0 – 4.50V
Charging 1 0|1
LED on 1 0|1|2
GPS on need 1 0|1|2|3
GPS antenna type 1 0
GPS antenna state 1 0
Last GPS fix UTC
time
14 YYYYMMDDHHMMSS
battery percentage 3 0-100
Flash type 1 0|1
Temperature <=3 XX
Reserved 0
Reserved 0
Send time 14 YYYYMMDDHHMMSS
Count number 4 0000 – FFFF
Tail character 1 $ $
<State>: The current motion state of the device.
21: The device attached vehicle is ignition on and motionless.
22: The device attached vehicle is ignition on and moving.
41: The device is motionless without ignition on.
42: The device is moving without ignition on.
<ICCID>: The ICCID of the installed SIM card.
<CSQ RSSI>: The GSM signal strength level.
<CSQ BER>: The quality of the GSM signal.
<External power supply>: Whether the external power supply is connected.
0: Not connected
1: Connected
<Mileage>: The total mileage is base on <ODO Initial mileage> which is a parameter in
AT+GTCFG.
TRACGL300AN001 - 57 -
Queclink
Confidential

Other manuals for Queclink GL300

Related product manuals