Quectel BC26 - ATE Set Command Echo Mode

NB-IoT Module Series
BC26 AT Commands Manual
BC26_AT_Commands_Manual 10 / 73
2.2. ATE Set Command Echo Mode
Parameter
Example
ATE0
OK
ATI
Quectel_Ltd
Quectel_BC26
Revision: BC26NAR01A01
OK
ATE1
OK
ATI
ATI
Quectel _Ltd
Quectel_BC26
Revision: BC26NAR01A01
OK
ATE Set Command Echo Mode
Execution Command
ATE[<value>]
Response
OK
If there is any error, response:
+CME ERROR:<err>
<value> 0 Echo mode OFF
1 Echo mode ON