Quectel BC26 - AT+CEDRXRDP eDRX Read Dynamic Parameters

NB-IoT Module Series
BC26 AT Commands Manual
BC26_AT_Commands_Manual 40 / 73
Example
AT+CEDRXS=1,4,"0101"
OK
AT+CEDRXS?
+CEDRXS:4,"0101"
OK
AT+CEDRXS=?
+CEDRXS:(0-3),(4),("0000"-"1111")
OK
2.20. AT+CEDRXRDP eDRX Read Dynamic Parameters
The execution command returns <AcT-type> and <Requested_eDRX_value>,
<NW-provided_eDRX_value> and <Paging_time_window> if eDRX is used for the cell that the MS is
currently registered to.
If the cell that the MS is currently registered to is not using eDRX, AcT-type=0 is returned.
1 0 1 1 30.72 seconds
1 1 0 0 33.28 seconds
1 1 0 1 35.84 seconds
1 1 1 0 38.4 seconds
1 1 1 1 40.96 seconds
AT+CEDRXRDP eDRX Read Dynamic Parameters
Execution Command
AT+CEDRXRDP
Response
+CEDRXRDP:<AcT-type>[,<Requested_eDRX_value>[,<N
W-provided_eDRX_value>[,<Paging_time_window>]]]
OK
Test Command
AT+CEDRXRDP=?
Response
OK
Read Command
AT+CEDRXRDP?
Response
OK
If there is any error, response:
+CME ERROR:<err>