Quectel BC26 - AT+MIPLDELETE Delete OneNET Instance; AT+MIPLADDOBJ Add LWM2 M Object

NB-IoT Module Series
BC26 AT Commands Manual
BC26_AT_Commands_Manual 64 / 73
7.2. AT+MIPLDELETE Delete OneNET Instance
The command is used to delete an OneNET communication instance.
Parameter
7.3. AT+MIPLADDOBJ Add LWM2M Object
The command is used to add LWM2M object.
Parameter
<flag> Integer. The message indication. The range is 0-2. If <flag>=1, means the first
message of the configure bin. If <flag>=2, means the middle message ofthe configure
bin. If <flag>=0, means the last message of the configure bin.
<Ref> If configure the ONENET complete, will return a <Ref: id>.
AT+MIPLDELETE Delete OneNET Instance
Write Command
AT+MIPLDELETE=<Ref>
Response
OK
If there is an error related to ME functionality:
ERROR
<Ref> Reference ID of OneNET communication instance.
AT+MIPLADDOBJ Add LWM2M Object
Execution Command
AT+MIPLADDOBJ=<Ref>,<objId>,<in
sCount>,<insBitmap>,<attrCount>,<a
ctCount>
Response
OK
If there is an error related to ME functionality:
ERROR
<Ref> Reference ID of OneNET communication instance.
<objId> Integer. Object identifier. If the object ID is not existed, the module will return ERROR.
<insCount> Integer. Instance count.
<insBitmap> Instance bitmap. For example, if <insCount>=3, and the <insBitmap>=101, means the