Quectel BC26 - AT+CIMI Request International Mobile Subscriber Identity

NB-IoT Module Series
BC26 AT Commands Manual
BC26_AT_Commands_Manual 32 / 73
OK
AT+CGPADDR=?
+CGPADDR:(0)
OK
2.15. AT+CIMI Request International Mobile Subscriber Identity
The command returns International Mobile Subscriber Identity (string without double quotes).
Execution command causes the TA to return <IMSI>, which is intended to permit the TE to identify the
individual USIM card or active application in the UICC (GSM or USIM) which is attached to MT.
Parameter
Example
AT+CIMI
460001357924680
OK
AT+CIMI Request International Mobile Subscriber Identity
Execution Command
AT+CIMI
Response
+CIMI: <IMSI>
OK
If there is any error, response:
+CME ERROR:<err>
Test Command
AT+CIMI=?
Response
OK
<IMSI> International Mobile Subscriber Identity (string without double quotes)