NB-IoT Module Series
BC26 AT Commands Manual
BC26_AT_Commands_Manual 23 / 73
1. 3GPP TS 44.060 specifies the system information messages which give the information about
whether the serving cell supports EGPRS.
2. 3GPP TS 25.331 specifies the system information blocks which give the information about whether
the serving cell supports HSDPA or HSUPA.
3. 3GPP TS 44.018 [156] specifies the EC-SCH INFORMATION message which, if present, indicates
that the serving cell supports EC-GSM-IoT.
4. 3GPP TS 36.331 [86] specifies the system information blocks which give the information about
whether the serving cell supports NB-IoT, which corresponds to E-UTRAN (NB-S1 mode).
5. <AcT> field is fixed at 9 for NB-IoT product .
Example
AT+COPS=0
OK
AT+COPS?
+COPS:0,2,"46000",9
OK
2 Numeric <oper>; GSM Location Area Identification number
<oper> String type; <format> indicates if the format is alphanumeric or numeric; long alphanumeric
format can be up to 16 characters long and short format up to 8 characters; numeric format
is the GSM location area identification number which consists of a three BCD digit ITU-T
country code coded, plus a two or three BCD digit network code, which is administration
specific.
<stat> 0 Unknown<stat> Integer ty<stat> 0 Unknown
1 Operator Available
2 Operator Current
3 Operator Forbidden
<AcT> Integer type; access technology selected
0 GSM
1 GSM compact
2 UTRAN
3 GSM w/EGPRS
4 UTRAN w/HSDPA
5 UTRAN w/HSUPA
6 UTRAN w/HSDPA and HSUPA
7 E-UTRAN
8 EC-GSM-IoT (A/Gb mode) (see NOTES 3)
9 E-UTRAN (NB-S1 mode) (see NOTES 4)
To Next Page
Loading...
