Quectel BC26 - Page 26

NB-IoT Module Series
BC26 AT Commands Manual
BC26_AT_Commands_Manual 26 / 73
Parameter
ePCO>[,<IPv4_MTU_discovery>]]]]]]]]
]]]]]
Read Command
AT+CGDCONT?
Response
[+CGDCONT:
<cid>,<PDP_type>,<APN>,<PDP_addr>,<d_comp>,<h_co
mp>[,<IPv4AddrAlloc>[,<request_type>[,<P-CSCF_disco
very>[,<IM_CN_Signalling_Flag_Ind>[,<NSLPI>[,<secure
PCO>[,<IPv4_MTU_discovery>]]]]]]]]]]
[<CR><LF>+CGDCONT:
<cid>,<PDP_type>,<APN>,<PDP_addr>,<d_comp>,<h_co
mp>[,<IPv4AddrAlloc>[,<request_type>[,<P-CSCF_disco
very>[,<IM_CN_Signalling_Flag_Ind>[,<NSLPI>[,<secure
PCO>[,<IPv4_MTU_discovery>]]]]]]]]]
[...]]
OK
Test Command
AT+CGDCONT=?
Response
+CGDCONT:(range of supported <cid>s),<PDP_type>,,,(list
of supported <d_comp>s),(list of supported <h_comp>s),(list
of supported <IPv4AddrAlloc>s),(list of supported
<request_type>s),(list of supported
<P-CSCF_discovery>s),(list of supported
<IM_CN_Signalling_Flag_Ind>s) ,(list of supported
<NSLPI>s),(list of supported <securePCO>s),(list of
supported <IPv4_MTU_discovery>s)
[<CR><LF>+CGDCONT: (range of supported
<cid>s),<PDP_type>,,,(list of supported <d_comp>s),(list of
supported <h_comp>s),(list of supported
<IPv4AddrAlloc>s),(list of supported <request_type>s),(list
of supported<P-CSCF_discovery>s),(list of supported
<IM_CN_Signalling_Flag_Ind>s) ,(list of supported
<NSLPI>s),(list of supported <securePCO>s,(list of
supported <IPv4_MTU_discovery>s)[...]]
OK
<cid> Integer type; a numeric parameter that specifies a particular PDP context definition. The
parameter is local to the UE-TE interface and is used in other PDP context-related
commands. The range of permitted values (minimum value=1 or if the initial PDP context is
supported, minimum value=0) is returned by the test form of the command.