Section Parameter Definition
mqttsettingstopic Alternative to the AWS IoT shadow for configuring ETM behaviour.
Subscription to this single topic enables commands to be sent
from the cloud broker to ETM via MQTT. Use:
<topic> – the subscribe topic title
<settings
port MQTT IP port. Default: 8883
singlepubtopic Predefined topic for single-publish systems
If this parameter is not set, it is not included in the
configuration file.
singlepubtopicqos QoS for single publish, defining the guarantee of message delivery.
Either:
0 (default) – at most once, no guarantee of message delivery
1 – the message is sent or delivered to the receiver one or more
times
singlesubtopic Predefined topic for single subscription systems
If this parameter is not set, it is not included in the
configuration file.
singlesubtopicqos Quality of Service (QoS) for single subscription, defining the
guarantee of message delivery. Either:
0 (default) – at most once, no guarantee of message delivery
1 – the message is sent or delivered to the receiver one or more
times
topicsuffix Appends a topic path to the end of the requested topic to uniquely
identify the thing on the broker.
thingname (default) – the AWS thingname
imei – the unique IMEI number for the device
none – the exact topic is used, with no suffix appended
If topicsuffix is not present in the configuration file,
then thingname is appended on the requested topic.
67
Eseye-enabled Quectel BG96 module Developer Guide v1.8
Using the Quectel BG96 module configuration file
To Next Page
Loading...
