To Next Page

To Previous Page

4.4.2 Encode setup

Setthevideo/audiocodeparameters:videole,remotemonitoringandsoon.

Seteveryindependentchannel’scodingparameterintheleftpart,andsetthe

combine encode parameter in the right part.

Note:Combineencodeintroducesvideocompressiontechniquewhichcombines

andcompressesmulti-channel’svideotoaspecialchannel.Applyingformulti-

channel playback simultaneously, Dial-up multi-channel real-time monitor,

mobile monitor and so on.

Picture 4.16 Encode setup

(Channel) Choose the channel number.

(Compression)StandardH.264mainprole.

(Resolution)Resolutiontype:D1/HD1/CIF/QCIF.

(Frame Rate)P:1frame/s~25frame/s;N:1frame/s~30frame/s

(Bit Rate Type) You can choose limited code stream or variable code stream.

Whenyouchoosethevariablecodestreamtherearesiximagequalityoptions.

(Bit Rate) Set the code stream value to modify the image quality. The larger code

stream value the better image quality.

D1(1000~1500kbps),CIF(384~1500kbps),QCIF(64~512kbps)

(Video/Audio)Whentheiconsarealldisplayedinreverse,thevideoleisvideo

andaudiomultiplexstream.

Combine Enable

(Combine Enable) When the icons are all in reverse displayed, opening

combination coding functions.

(Mode

)multi-channelplaybackisusedinallchannelstoplaybacksimultaneously,

and the narrowband transmission is used in multi-channel real-time remote

monitoringsimultaneouslyatnarrowbandstate,especiallyusedwithamobile

screen.

www.cctvireland.ie

Lo-Call 1890 866 900

e-sales@cctvireland.ie

Qvis DVR series User Manual

Questions and Answers: