Qvis DVR series User Manual

32
4.3.2 Video Blind
Whenthevideoimageisinuencedbyenvironmentalfactorssuchasexcessive
brightnessorreachingthesetsensitivyparameter,thecameramaskfunctionand
the linkage function are turned on.
Picture 4.9 Video Blind
Setmethod:refertochapter4.3.1.Motiondetect
Note:"Advanced"buttonisthesameasright-click.
4.3.3 Video Loss
When the equipment can not obtain the channel video signal, the video loss
alarm is turned on and the linkage function is turned on.
Picture 4.10 Video loss
Setmethod:refertochapter4.3.1.Motiondetect
Note:"Advanced"buttonisthesameasrightclick.
www.cctvireland.ie
Lo-Call 1890 866 900
e-sales@cctvireland.ie

Qvis DVR series Specifications

General

Brand	Qvis
Model	DVR series
Category	DVR
Language	English