37
(PPPoE setup)
Picture 4.19 PPPOE
Input the user name and password that the ISP (Internet service provider)
provides. After saving it reboot your system. Then the DVR will build a network
connection based on PPPoE. The IP address will change into a dynamic IP
address after the above operation is done.
Operation
:AfterPPPoEdialingissuccessfullylookuptheIPaddressinthe[IP
address] and obtain the current IP address. Then use this IP address to visit the
DVR through user port.
(NTP setup)
Picture 4.20 NTP
The NTP server must be installed in the PC.
Host computer IP
:InputtheIPaddressinstalledNTPserver.
Port:Default:123.YoucansettheportaccordingtoNTPserver.
Time zone:LondonGMT+0,BerlinGMT+1,CairoGMT+2,MoscowGMT+3,
NewDelhiGMT+5,BangkokGMT+7,HongkongBeijingGMT+8,TokyoGMT
+9,Sydney GMT +10,Hawaii GMT-10, AlaskaGMT-9,Pacic timeGMT-8,
AmericanmountaintimeGMT-7,AmericanmidtimeGMT-6,Americaneastern
timeGMT-5,AtlantictimeGMT-4,BrazilGMT-3,AtlanticmidtimeGMT-2.
Update Period:ThesamewiththeNTPservercheckinterval.Default:10minutes.
To Next Page
Loading...
Need help?
General
