Server IP: Input IP of NTP server.
Port：The default port is 123.
Update cycle: The interval time is between 1 to 65535 min.
【IP Filter】DVR authority management. If you enable the white list, only the filled IPs
can be connected. This system supports a max of 64 IPs.
【Multicast】Transfer Capability Set: Enable the max connection and set network
connection NUM, network connection NUM, transfer mode and LAN download.
Port Set:
1. TCP Port. Default: 8000.
2. HTTP Port. Default: 80.
3. UDP Port. Default: 8001.
4. UPNP Port Mapping：Enable the function and make sure UPnP
feature is enabled on the router.
【Email】Enable the function. Set the SMTP server’s port, username, password, the
sender’s mailbox and receiver’s mailbox.
【FTP】Choose to upload records or images.
1. Set FTP server’s IP address and port (Default: 21).
2. Create an account in FileZilla Server on the computer.
3. Fill in the username, password and remote directory which have been created.
4. Set file length, channel, time for recording, type and date and so on.
5. Tick alarm, motion and general records or images to upload.
【Alarm Center】Set the platform software’s IP, port, and time for uploading the
alarms.
【RTSP】The Real-time streaming protocol and the transmission of multimedia data
protocol can be used to support the RTSP protocol player to play.
【3G】Supports 3G card in dial-up network to provide remote equipments access.
To Next Page
Loading...
Need help?
General
