Push Service
The device supports the use of a push service and the smart phone mobile client. The
interface is mainly used to open the push service. The current mobile client associated
with the DVR, local real-time alarm information will also be sent to the phone even in
the case that the mobile client is unopened.
2.4.4 Alarm
Detect
【Motion detection】motion detection and alarm
【Zone setting】22*18 =396 zones mask
【Sensibility】6 grades
【Management】as same as local alarm
【Preview】alarm preview
【Video lose】detect video loses and alarm
2.4.5 Account
NOTE: Group and user names can be from 1-6 characters in length. Valid
characters include letter, numbers, and limited symbols: underline, subtraction
sign, dot, you may not use a space as a leading or ending character.
There is no limit to the number of groups or users. By default there are two different
group levels: admin and user.
User management determined upon two levels: the group and the user level.
To Next Page
Loading...
